- UL Listed for use with Fire Protection Anti-Freeze Systems
- per NFPA 13
- Compatible with antifreeze solutions (Glycerine and Propylene Glycol)
- All Steel construction, Stainless Steel connection
- Painted red, Polypropylene liner
- Maximum working pressure 175 psi

Additional Files

Click on the buttons inside the tabbed menu:

Tank – Expansion FIRE X-TROL

 

- ULC & FM approved
- 175 lb. WWP Bronze Gate Valves
- Fire Protection Valve
- Screw-over Bonnet, OS&Y
- 175 PSI/1.2.1 Bar Non-Shock cold water
- Brass Valve
- Threaded from 1/2” to 2”

Additional Files

Click on the buttons inside the tabbed menu:

Valve – OSY Threaded 8088100

 

- ULC & FM approved
- Available from 2-1/2” to 8”
- Epoxy coated cast iron, resilient wedge disc
- For fire sprinkler main shut off and distribution service

- ULC & FM approved
- Grooved x Grooved ends
- Flanged x Grooved ends
- Cast Iron body, Epoxy coated
- 2-1/2” to 8” available

- UL, FM, ULC approved
- Slow close butterfly valves with built in tamper switch
- Wafer or Grooved
- Working Pressure: 300 psi
- Maximum test pressure: 600 psi
- Factory installed UL tamper Switch
- Body: Brass & Bronze
- Disc: Brass, Ductile Iron
- EPDM Encapsulated

Additional Files

Click on the buttons inside the tabbed menu:

Valve – Butterfly 2” to 8” - 8037212

 

- UL, FM, ULC approved
- Slow close butterfly valves with built in tamper switch
- Threaded or Grooved
- Size 1” to 2-1/2” Threaded
- Size 2” & 2-1/2” Grooved
- Working Pressure: 175 psi
- Maximum test pressure: 350 psi
- Factory installed UL tamper Switch
- Body: Brass & Bronze
- Disc: Brass, Ductile Iron
- EPDM Encapsulated

- Groove x Groove
- cULus and FM approved
- Installs in vertical or horizontal positions
- Meets ASTM A126 Class “B” rating
- Standard and shot gun configurations
- Spring loaded stainless steel clapper, EPDM rubber facing
- Cast Iron body, brass seat, bronze hinge pins
- Leak tight seal against back pressure greater than 1 PSI

Additional Files

Click on the buttons inside the tabbed menu:

Swing Check Valve - RCV

 

- ULC and FM approved
- Check Rite's #212 wafer check valve
- Available from 2” to 10”

Additional Files

Click on the buttons inside the tabbed menu:

Check Valve – Wafer - 8080200

 

- cUL approved
- Groove x groove ends
- Made of brass with a working pressure 175 PSI and complete with vent

- 3/4” MHT x 1/2” MIP x 1/2” FCS
- 1/2” copper sweat is inside the 1/2” MPT