K  Factor  K=4.2 (60.5)  Thread Size1/2" NPT  Temperature162°F / 72°C

- Solder type
- Ideal for use in wet pipe residential sprinkler systems as per NFPA 13D, 13R, and 13.   

Additional Files

Click on the buttons inside the tabbed menu:

R3 HF-RES-SS4423-Datasheet

 

R3 Hlush Horiz 4423 SS

 

K  Factor K=4.9 (70.6) Residential  
Thread Size  1/2" NPT  
Temperature162℉ / 72℃ Sprinkler with 140℉ / 60℃ Cover Plate  
Vertical Adjustment: 3/8 inch (9.5 mm)  
Compact Concealed Head using a 2 3/8” cover plate. Size matters and smaller can be better!

For plate options click here

Additional Files

Click on the buttons inside the tabbed menu:

R2 CN-RES-SS8421-Datasheet

 

R2 CN-RES-4_9K

 

- 162°F / 72°C Sprinkler with 140°F / 60°C Cover Plate
- 205°F / 96°C Sprinkler with 162°F / 72°C Cover Plate

- Solder type
- Ideal for use in wet pipe residential sprinkler systems per NFPA 13D, 13R, and 13.
- Standard cover plate is 3-1/4” (83mm) in diameter
- Smaller 2-5/8” (68mm) cover plate and 2-5/8” (68mm) square cover plate are also available
- Cover plates are available in 11 standard finishes and unlimited custom color and pattern finishes

For plate options click here

Additional Files

Click on the buttons inside the tabbed menu:

R1 RC-RES-SS8561-Datasheet

R1 RC-RES-SS8561-Drawing

 

R1 concealed head flyer

R1 Flat_Concealed_Sprinker_Line

 

- Intumescent Silicone (expands when exposed to temperatures above 150°C (300°F))
- Self-Seal GG-266 has achieved GREENGUARD GOLD Certification
- Non-sag silicone, Water-resistant before, during, and after cure
- Freeze-thaw stable, Protects your wall & floor openings
- Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation

- General information sign, covering all details of the installed system
- Aluminum sign for fire sprinkler systems
- Size 10” x 12” White aluminum, with mounting holes
- Clear protective coating, remove before installation

Professional grade Omega air compressors
- Heavy duty single stage compressors
- Belt guard included
- CSA approved electrical motors
- Cast iron pump housings
- Flywheel designed for pump cooling
- Manual reset for overload protection
- Quiet operation
- Pressure factory setting 50 – 80 PSI
- 115 / 1 phase AC voltage
- Tank size 20 gallons
- Regulator, gauge and switch included
- Base units are available
- Other tank sizes, voltages and horse power options available upon request

Fire Sprinkler Series, Omega air compressors
- Belt guard included
- CSA approved electrical motors
- Cast iron pump housings for durability
- Pumps supplied with oil sight gauge
- Flywheel designed for pump cooling
- Manual reset for overload protection
- Pressure factory setting 30 - 50 PSI
- Air receiver rated at 200psi and CRN approved
- 115 volt / 1 phase standard, (230 volt /1 phase optional)
- Quiet operation
- Tank Size 20 gallons
- Magnetic starter required
- Factory mounted options available
--Low oil shutdown with magnetic starter
--Auto drain (electronic or pneumatic)
--Belt guard after cooler option

Additional Files

Click on the buttons inside the tabbed menu:

Nitrogen Air Maintenance Device 4070901 NAMD

 

NAMD 4070901 Sales Flyer

 

The Portable Nitrogen Analyzer is an easy way to determine the purity of nitrogen that the Potter Nitrogen Generator is producing
- One button calibration
- Maintenance free

Additional Files

Click on the buttons inside the tabbed menu:

PNA 4070900

 

Additional Files

Click on the buttons inside the tabbed menu:

Nitrogen Generators INS100

Nitrogen Generators INS250

Nitrogen Generators INS600

 

Nitrogen Generator