- Box Joint Pliers
- Black Phosphate Finished
- PVC Dipped Handle

- Polished high carbon drop
- Forged steel
- Perfectly mated cutter
- Heat treated to hold it's edge

- Designed for cutting mild steel and stainless steel threaded rod
- Deburring work after cut can be ELIMINATED because of unique blades and mechanism
- Not to mention It's FASTER, CLEANER and SAFER
- This is the answer to the Occupational Safety ban on using chop saws for deburring threaded rod
- Designed for cutting mild steel threaded rod
- Approximately 600 cuts per side of double sided blades

- Secure grounding of the electric drill to the pipe eliminates the possibility of an electric shock in wet or damp areas
- Insulated Handle for advance drill tool affords additional protection against electric shock
- No Drill Twist to injure fingers or wrist as often occurs with drilling large diameter holes with a hand-held drill
- Eliminates Hazard to a drill operator working in a difficult or dangerous position while trying to exert high pressure on the cuffing tool such as when in a trench, on a scaffold or on a ladder
- Greatly Reduced Drilling Time is achieved through the use of a rack-and-pinion drive to advance the cutting tool, which the operation to effortlessly exert high pressure on the cutting tool
- Longer Life for cup hole saw or cutting tool, due to precision alignment of fixture to work piece
- Cost And Time Savings due to elimination of a pilot drill with the cup hole saw
- Small Pipe Adapter allows standard unit to be mounted on pipe with diameter as small as 1-1/4”
- Mounts Easily and Quickly to various size pipes, up to 10” diameter

- 8 compartments and a fold away handle
- Excellent for copper fittings
- 18 gauge epoxy coated steel

- Holds both 1/2” and 3/4” nipples
- Holds (39) 1/2” CL thru 6”
- Holds (39) 3/4” CL thru 6”
- Fold away handle
- Epoxy coated steel
- 12-3/4” x 7-1/2” x 6-1/2”

- Holds CL thru 6” nipples
- Fold away handle
- Epoxy coated steel, light weight yet strong

- Redesigned spot rite level
- Use as a torpedo level or a sprinkler drop levelling tool.
- Strong magnetic holds
- Aluminum frame for extra strength.
- Large vials for easy visibility
- ½”, ¾” and 1” threaded ends

- Makes all hole drilling accurate
- A center punch and level combination accurately locates position of holes to be drilled into pipe
- Excellent for field or shop use
- The housing is aluminum
- Mineral spirit leveling vials are inset, protected by the housing and visible from 2 sides

- The Dual-Vac is a new way to approach the old problem of removing water left in a piping system after draining. It makes repairs and modifications easier.
- When connected to piping the water distribution system becomes a vacuum system
- Dual-Vac combines the benefits of wet/dry vacuum and a submersible pump
- Submersible pumps will not lift water below the inlet, often much water remains. Combining a wet/dry vacuum with a submersible pump makes a unit with unlimited water clean up capability that will vacuum away water to the last drop
- The Dual-Vac will such the water away from the opening you have created, allowing you to work without the normal problems caused by water left in drops or other system piping